Solid wood countertops are all-natural items made of timber from trees approximately 120 years of ages. Timber is a living product and the more wetness gets, the extra the wood counter top will certainly expand. The wood we utilized in solid wood worktops has been previously kiln dried to a humidity level of 6%, and it is for that reason crucial that the worktop is not subjected to a regularly high degree of humidity. Generally the moisture level in kitchens is approximately 50-70%.
The strong timber top should be attached to the cabinet box making use of just wood screws and also washers. It is not recommended in all to adhesive the top on the cupboard box; the top and also package broaden and also contract at different prices, as a result cracks may at some point appear, the majority of probably on the closets' surface area.
The proper method of mounting a solid wood top is using metal dealings with along the cabinet box (see our internet page).
The steel repairings need to be evenly dispersed throughout the length of the top, spaced at a 1' - 1.5' range from each other. Across the width, the top is normally dealt with to each steel assistance with 3 screws, one between, one toward the front side and one toward the back side. The assistances need to be completely leveled; otherwise tensions can create in the timber, causing warping, cupping, or cracks.
We advise pre-drilling the screw openings into the timber counter top, to avoid fractures and divides. For the exact same reason, it is an excellent concept not to over tighten up the screws. The completing will considerably decrease the extent of such motions, yet will not remove them altogether. Because of the panel's laminated framework, the lengthwise movements are trivial, so the installer should take note of the movements happening throughout the panel's width. In order to avoid the advancement of internal stress, the openings in the steel mendings must be extended towards the movements (see our website ).
When exposed to normal humidity levels - i.e. 50-60% - the worktop's width will broaden by 1/12"-1/ 24", however when subjected to a degree of 80-90%, this dimension might broaden by as much as 1/2" or even much more for some species. Therefore, when the back side of the counter top is set up versus a wall, the wall could limit the top's natural activities, causing unwanted tensions in the timber. To prevent this, you can allow a 1/4"-1/ 2" joint in between the wall and also the counter top edge as well as caulk it with a thin quote of acid-free silicone.
Additionally, you can securely fix the back side to the metal supports beneath as well as therefore, enable the all-natural movements to happen at the expenditure of the opposite edge.
In this instance, the holes in the metal fixings representing the back side will certainly be no bigger Butcher Block Co Live Edge dining table than the screws size, while the holes representing the middle section and the leading edge will be lengthened.
For extra info pertaining to the setup of wood counter tops, bar tops as well as kitchen islands, please visit our website.